iFlight Nazgul5 Evoque F6D Deadcat Analog 6 Inch 6S FPV Racing Drone with BLITZ MINI F7 FC 55A ESC RaceCam R1 Mini

Description: Brand: iFlight Item Name:Nazgul5 Evoque F6D Total Dimensions: 262.6mm (DeadCat) Geometry: DC (DeadCat) frame Bottom to top distance: 28mm Arm Thickness: 6mm Bottom plate thickness: 3mm Top plate thickness: 3mm Upper(middle) plate thickness: 3mm XING2 2506 1500KV motors 6035 propellers Camera: RaceCam R1 Mini (Analog Version) VTX: 600MW VTX (Analog Version) Weight: 464.3g (without battery and mount for Gopro) FC // BLITZ MINI F7 MCU：STM32 F722 Baro: NO Betaflight OSD：IFLIGHT OSD （AT7456E) Blackbox：16MB 5 X Uarts - UART1 for VTX HD/Analog - UART2 for Receiver - UART3、UART4 for GPS or 0ther sensors that require a serial port - UART6 for ESC Telemetry - 4×Dshot/PWMoutputs - 1×I2C - 1xSH1.0 9pin connector for HD VTX/Analog VTX& CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI） - 1xSH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G) - 1xSH1.0 6pin connector for Any Receiver or DJI（3V3/R2i/5V /G/R2/T2） - 1xSH1.0 4Pin connector GPS (T4/R4/G/5V) - 1xSH1.0 4Pin connector LED& Beeper (BUZ/LED/G/5V) - Smartaudio& IRCTramp VTX protocol supported - WS2812ledStrip：Yes - Bepper：Yes - Firmware: IFRC-BASEF4 4.X.X - Mounting：20*20mm/φ4 - Dimensions：30.5*27mm - Weight：5.0g BlackBox: 16MB DJI Air Unit Plug-and-Play. No need to solder tiny wires. BAT, +5V, 3.3, Start indicator With LC filter. ESC // BLITZ Mini 55A Dimension: 35*42mm Mounting Holes: 20*20mm/Φ4mm Weight: 11.3g Supports 2-6S lipo input MCU：G071 Constant: 55 Amps Burst: 60 Amps Current sensor: Yes BEC: No Current rate: 100 Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Firmware: BLHeli 32 Target: IFLIGHT_BLITZ_G1 Package included： 1 x Nazgul Evoque F6( Deadcat version) 4 x 6035 Propellers 2 sets of Battery Pads 4 x Battery straps 1 x Screws bag